Getting ready for some printing

I have some time tomorrow to do some more printing and I've got my ink and desktop both ready to hit the ground running when I wake up.

I've carved both of the mini prints to the next step.  This is the final color for the Shake Shack print and second to last for the neon "M".  I've also got my paper prepared for the Utah landscape that I started a little while back and also think I may be ready for printing of the La Rose Shop.

After printing the last color of the La Rose Shop, I wasn't really sure where the next color was exactly going to be.  The side of the building that the sign resides on has been painted over multiple times and shows the wear and tear of weather as shown in the pics below.

Parts of the sign are actually the same green as some of the painted wall.  I've carved away some of the brick work as well as partial bricks in hopes of showing left over paint.  I'm printing the brick color which will also be used for the painted "La Rose" lettering.  Just hesitating on this one while I make sure that I'm doing exactly what I want to.  Hoping to get in printed soon, but the minis and the landscape come first.

Also looking for additional ideas for more mini prints.  I have a lot of reference photos so hopefully I'll get some good ideas soon.  Have an idea for a landscape as well in these....it's just so small that it concerns me to try to it.

#art #printmaking #linocut #reductionlinocut #linoprint #reductionprint #minilino #ShakeShack #M #YMCA #LaRoseShop #printingprocesses

I have not fallen off the planet.

Hi everyone!  So I've taken a little more time away from updating than I had hoped.  I am still quite around, but I've been spending a little more time exploring with my wife and working a little overtime at my job to help support our light travelling habit.

Anyhow, I have managed to get a couple pieces worked on since my last post.  First up is the mini, 3x3" neon "M".  I printed the 3rd color to this piece this past week.  I needed a color that was ever so slightly darker than the previous color and added some violet (purple) into the previous left over 2nd color to cool it down a bit....basically a medium light grey into a medium light grey with a blue-ish cast.

The difference is noticeable to the eye, but the camera does not notice that difference what so ever.  I tried toying around with the image in Photoshop, but to no avail.  Below is the updated image...next color up is red.  I'm excited to print that color as it will almost completely pull the little print together.

I also used the medium light grey used in the "M" to also print out an edition of 5 for the Green Street lino that I started a little while back.  This is my first attempt at doing a city street.  The original image, as stated in a previous post is just up the street from where I live.  I'm a little weary about how this piece is going to actually turn out so that's why I decided to keep the edition size rather low.  It is also the first time that I'm attempting to do a linocut while the linoleum is taped down onto a rigid board.  It's much harder to carve since the board sticks out and prevents the piece from sometimes being spun to angles that make it easier to carve.

Here is the linoleum which has been carpet taped down to this piece of thick book board.  I'm also using Ternes Burton registration pins to assist with this piece.  The block in this image has also been inked up with the grey and below is the first printed image.

There is a lot of detail to this piece and the carving seems to be going fast, but I'm constatly finding places that need carved.  Before printing the next color I plan on working from left to right on the block and making sure that all areas that I want removed have been carved away.  I can definitely say though that I am not unhappy with this piece....I'm probably looking at a good 8 or 9 more colors.

Finally!  There is also the Shake Shack mini print.

Again....same color grey.  I used it on multiple prints as to better coordinate my printing and allowing me to print multiple projects as quickly as I could.  This little guy is carved out already and ready for the shadow grey which will probably just be a much darker grey than what is shown here.  It will then be finished off with a very dark grey...one that is very close to black.

I like using black, but find that it sometimes overpowers the print due to the extreme in contrast.  I discovered this issue during the FU print.  I really wish I had not used black as the final color.  To me, the black just overpowered everything on the print.  Lesson learned....very dark grey instead.

I will be doing some printing this week so I promise to get the next update out as soon as possible.  I may even print tomorrow night....maybe the M or maybe even the Shake Shack.  Carving on the La Rose Shop has also started and should be completed relatively soon.  I'm going to do a little research on how to make a nice brick red color (though I do have some ideas).

Til next time!

#art #printmaking #linocut #lino #reductionlinocuts #linoprint #printingprocesses #shakeshack #YMCA #Pittsburgh #GreenStreet #Greensburg #PA #LasVegas #NV

Different type of work day equals some time for art.

 

So today I'm not working my regular shift and have the morning off.  Since I had some of that time off I decided to finish up some carving on the "B".   I considered printing the next color, but have other projects that I need to advance.  At least I've completed carving away the light yellow of the letter of the actual painted letter.

The image on the left is the completely carved block which is ready for printing while the one of the right is the progress that I had made previously while on break at work.  I do want to double check to make sure that all of the areas are appropriately carved out and that I didn't miss anything.

I also decided to print the shadow on the neon tubing for the 3x3" Shake Shack mini-print.

So far the yellow and light green of the tubing have been printed and I've even carved this block so that it's ready for the color in a couple days.  According to my notes I still have to print a light grey, dark grey and either a black or a very dark grey.....probably a very dark grey.  It always seems to work out better than black.

I've also torn up some paper and started placing registration tabs on them for the Utah desert/bluffs linocut that I've started.  I'll be honest when I say that I really don't know what to call them.  I'll be excited to get that piece started as I don't do many landscapes and it's definitely something I want to learn to do better.

I'm also starting to play with some other images from Zion National Park, but for the moment it's simply just playing with them until I perhaps get them to a point where I'm comfortable with them.

Below are the photoshopped versions of the photos.  I sometimes use photoshop to try and break a photo down into simpler forms as things can sometimes be a bit overwhelming with all the information, colors and variations.  I've been working with the bottom left the most as the way the rock seem layered over one another really appeal to me.

 

 

#art #printmaking #linocut #reductionlinocut #ideas #printingprocesses #carving #printing #ink #B #BucaDiBeppo #neon #sign #landscape #Utah #ZionNationalPark #photoshop