Showing posts with label #neon. Show all posts
Showing posts with label #neon. Show all posts

Wednesday, March 31, 2021

A new year...a new...wait....old...Cafe

Cafe - 2016

Oh dear....it's been quite a while since my last update.  I will say though that things got very busy over the holiday season and finishing up the Pluto's Toy piece (see last post) really took a lot out of me creatively.  

I have been slowly at work though on a couple projects.  I will try to highlight the stages of production for some of those each week.

My first post I suppose will start with this piece that I attempted back in 2016.  It is part of the sign for the Harley Davidson Las Vegas Cafe which is now closed.  I liked the Cafe part of this sign very much and I was still very "young" when it came to making prints at home rather than in a studio environment.  I was also painfully learning about the issues of different inks.  Three colors in and this 9x12" piece became my first major disaster (if I remember correctly).

So...fast forward 4 years and my desire to complete this piece properly came back to me.  I always had one of the failures hanging on the wall as a reminder of what could've been.

Cafe - 2020/2021

This lino block was started and carved back in late 2020.  The original was 9x12" and I decided to make my life easier with the smaller details by turning this one into a 12x16" piece.  Though I would love to work on smaller pieces, I find that pieces larger than 10x10" are more fun for me.

Part of my issue with the first attempt was that I printed grey first.  I learned very quickly that yellows or variations there of should always be printed first.  This image is a light yellow highlight on some of the neon tubing and then the second color a warm yellow which is the actual coloring of the tubing for this print.

Next step is a light grey for other areas of neon tubing.  This grey actually printed darker than I wanted, but I discovered a way of fixing that issue on another print that I was working on so my next color will actually become the highlighted area of the tubing.

As for now though...this is the current stage of the Cafe.  I'm currently in the process of carving out the neon tubing and will hopefully have an update on this piece in about a week or so.

#art #printmaking #linocut #reductionlinocut #cafe #neon #lasvegas #harleydavidson #printingprocess








 

Thursday, September 17, 2020

Pluto's Toy - Completed! 32x15" - Reduction Linocut

 
Pluto's Toy - Finished piece with pencil (for scale)

I've been pretty silent lately, but have no fear, I have continued working on my artwork as time has permitted.  My regular day job has been very busy the last couple months partially due to the coronavirus and partly due to lack of co-workers.

I was at least able during this time to finish this large linocut as well as work on some smaller pieces that I'll have to make a post for as well.  I was very exciting to get this piece finally completed as I was able to submit it for consideration for an upcoming exhibition.

 

The last couple colors such as the dark grey and black actually took longer to print than most of the much larger colors.  Some of the areas were difficult to ink up such as the hardware parts that secure the neon.  It would normally take about 5 to 6 minutes for me to simply ink up these tiny little pieces properly.  It's very easy to over ink these areas and I'm usually very good at that, but I really paid very close attention to how much ink was on the brayer.

I have a fair amount of pieces that are currently in progress including three different Maine lighthouses, some more neon and a still life (or two).

I enjoy making these posts and hopefully will have some time open up so that I can do more of them more often.  Have a nice day!

#art, #printmaking, #linocut , #printmakingtechniques, #printingprocess, #plutos, #toy, #disney, #disneyhollywoodstudios, #neon, #wip, #completed

 

Wednesday, August 29, 2018

Ice Cream!!

Ice Cream - 16x20" - Reduction Linocut

I've restarted the Ice Cream print due to unhappiness with the original that I started a while back.  Originaly I started with a light grey color that completely altered the color of the next layer...a light yellow.  Yellow is generally very transparent so the grey showed through and created a very non-appealing yellow color.

I chose to restart and instead of starting with grey I began with a very light yellow.  This time around I'm going to do all the yellows and some light oranges before moving onto the grey.  I am at the moment right up against vacation and a friend's Grand Opening of a business she is opening so I probably won't have any time to work on this until my return from vacation.

I am going to continue printing both the original print that I started as well as the newer piece.  I'm going to probably alter the colors of the older piece since it wasn't quite working out as expected.  I am excited about this piece and some of the upcoming pieces that I have planned.

Stay tuned...but I probably won't post for another two to two and a half weeks.

#art, #printmaking, #linocut, #reductionlinocut, #neon, #icecream, #yellow, #disney, #californiaadventure, #california, #paradisepier

Friday, August 17, 2018

Flo's V8 Cafe - Disney/Pixar themed Original Linocut

Flo's - 12x16" - 10 Color Reduction Linocut (COMPLETE)
Edition: 7 - 1 Artist Proof

So here it is!!  After a couple months worth of work I finally printed the final color (black).

The registration on this piece has been fantastic.  I usually tend to lose 1 or 2 prints from an edition due to registration issues, but this time I printed 8 and still have 8.  I have several other signs from Cars Land at Disney's California Adventure that would be just as fun as this one was. 

I'll be considering them in the future, but I do have a couple smaller pieces that I've started as well as one that will be probably the biggest piece that I've ever attempted.  The big one will push the limit of my press.


Here is the progression of steps for the colors used in this piece.  I apparently missed taking a photo of the second step which was the light pink by itself.  The second image that has the grey and pink also includes a darker pink that was printed 3rd.

#art #printmaking #linocut #reductionlinocut #printingprocess #flos #disney #pixar #cars #carsland #californiaadventure #disneyland #reliefprint #neon 


Tuesday, June 12, 2018

Two completed pieces and a Flo.

Coca-Cola Bottlecap - 3x3" reduction linocut -COMPLETE!!

I finally completed the Coca-Cola bottlecap this past week.  I'm very happy with how it turned out.  For something that started out as a small test piece for a possible larger piece, I'm pleased that I decided to go this route.

The only disappointment that I have with it is after carving the background away, I needed to leave some areas uncarved so that the block fit into the registration jig properly.  Those uncarved areas are seen at the top corners and the bottom right (slightly) - they became embossed into the papers surface as I continued printing.

 
Flo's - 12x16" reduction linocut

Flo's is still continuing to impress me.  The registration has been exact on every single piece.  I've never experienced this success yet and I'm down to 3 colors left and this piece will be complete.

The left image shows the block as I'm just starting to ink it up.  I have to roll multiple, thin layers of ink across the surface and slowly build up the ink.  I usually spend about 10 minutes just slowly inking the block and trying to make sure that there is an even coating of ink before I print.  After the block has been inked and printed for the first time it becomes much easier to ink.

Flamingo - 8x6" reduction linocut - COMPLETE!

I've struggled to get a good picture of this piece.  It seems to drive the camera on my phone as well as my traditional camera crazy and the quality is almost always poor for this piece.  Both cameras work great for every other piece I've done or am working on, but for some reason they both struggle to take a decent picture of the Flamingo.

I did decide to print one last color onto the Flamingo.  If you look along some of the edges you'll notice a much darker, bold line.  It does not completely outline the Flamingo, but instead just where the shadow fell.  I do like how this piece finally turned out and I'm much happier with the additional dark areas.  I believe that I've now completed 4-5 pieces so far this year...which is probably the most I've ever completed at this point.

#art #printmaking #linocut #reductionlinocut #reductionprint #neon #bottlecap #coke #cocacola #flamingo #lasvegas #lightandshadow #flos #cars #carsland #disney

Saturday, May 26, 2018

Slow progress, but carvings galore -

Hi everyone!!  I've been making slow, but steady progress on multiple pieces and haven't actually done any printing in the past 2 weeks.  I've been spending a lot of time with the Ice Cream linocut that I restarted.  I had planned on printing one day and instead spent that time carving instead.

Here we go though.... 

Ice Cream - 20x16"

I've been working fairly slowly on the new Ice Cream piece and carefully carving away the areas within the text of Ice Cream.  I'm sure I've mentioned it before, but since I created my own shadows there is a lot of confusion as to what is what when looking at the piece.  There is the white (paper) area that I'm trying to carve, but also the cast shadow, the pinkish/red outline of the lettering and the cast shadow across it. 

Lots of lines and possible areas for mistakes so I keep the reference photo on my desktop and try to pay close attention to the where the pinkish/red and white meet and then figure out on the lino where the cast shadows are in relation to what I'm looking at.  I'm getting there though.

Flo's - 12x16"

I just recently finished carving this piece.  It is now ready for the next color, but it's going to probably wait until after the upcoming Memorial Day holiday.  Most of the time I usually have available during the night or week has been mostly taken up by overtime at my job.  This piece will be one of the first pieces I plan on printing once I get my chance.

 
Flamingo - 8x6"

It has taken me a couple weeks to make a decision on this piece.  Every couple days I've looked at the print and pondered what to do about adding another color.

I made up my decision this past Thursday and carved the block and now I'm ready for one more color.  This piece will also be one of the first blocks I attempt to print.  I have an upcoming deadline for an exhibition and I think that I would like to submit this piece to that show.

#art #printmaking #linocut #reductionlinocut #flamingo #flos #icecream #neon #lightandshadow #printingprocess

Thursday, April 5, 2018

Pixar and soda (pop) based inspirations

 
Flo's - 12x16" - 9 Color Reduction Linocut

I've begun working on a couple of the newer pieces that i have been planning.  First up is "Flo's", it is based on a location in the Disney/Pixar film Cars.

Disney has always been a major inspiration for myself.  During high school the only thing that I wanted to do was become a Disney animator.  I did pursue that dream and attended college for animation.  Though the dream of animating for Disney never came true, I did get to work freelance in animation for a small studio located just outside of Pittsburgh, PA and I did get to see my work on a big screen (okay, so it was a scoreboard at PNC Park (home to the Pirates), but it was still a big screen).

During our last anniversary trip, my wife and I traveled to California and spent the first couple days at both Disneyland and Disney's California Adventure.  If you have not had the chance to visit California Adventure, I do recommend giving a shot at some point.  Cars Land is a section of the park completely devoted to the movie Cars and is practically a perfect recreation of Radiator Springs from the movie....neon and all.  Both my wife and I became quite enamored with the place that we visited 3 times over our last 2 days at Disney.

My piece, "Flo's", is based on a photo that I took of part of the signage for the fictional gas station.

(Inked block - Color #1 - Light Grey)

 
(Left: Color Proof - Right: Printed Light Grey Layer)

 
Coca-Cola - 3x3" - 5 Color Reduction Linocut

I've also started another mini print of a Mexican Coca Cola bottlecap.  Coca-Cola recently released Georgia Peach and California Raspberry flavored glass bottled Cokes.  After trying them both I wound up sitting on the couch with my wife for a while.  When I went to throw the bottles and caps away, I noticed that the light from the lamp created all types of highlights and shadows across the bottle cap.  Needless to say...it stopped me and though the original intention was to do the Georgia Peach cap, I decided instead on a traditional Mexican Coke cap.

I would like to do a larger scale piece, but really want to do a test piece first so I've chosen to do a mini-print of it first.  Depending on the outcome of this piece may lead to larger 8x8 or 10x10" pieces.

(Paper "white" areas carved away and prepared for printing of first color)

Lastly....

YMCA - 4x12" - 5 Color Reduction Linocut

This is a piece that I've fiddled with since I first started doing linocut.  It's based off of a location on Pittsburgh's North Side.  I've struggled doing this piece ever since and I don't understand why...it's a simple 5 color piece.  The "M" was recently the subject of one of my mini-prints.  This piece isn't overly large and part of me would really like to do it as a large scale piece...say 9x20" or 10x22".  Since I have the Flo's and another 16x20 piece currently in my pipeline, I'll hold off for the time being and just complete this smaller version.

That's all for this update.  I should have some new printed pieces by the end of today and tomorrow.

#art #printmaking #linocut #reductionlinocut #printingprocesses #lightandshadow #neon #bottlecap #disney #pixar #animation #flos #carsland #californiaadventure #ymca #cocacola #coke




Saturday, December 16, 2017

"a", "Green Street", "Taco" and "Zion" mini



Even though my up dates are a little slower these days, I still manage to work out a couple prints a week.  Granted this process all takes place within 5-6 hours on a single day, but.....it's at least progress towards their end points.  I suppose one update every other week isn't too bad though. =D
 
As shown above though, I printed the second color to the "a" print.  The first color, a light grey was for the shadows on the neon tubing.  This second color, medium grey, is another shadow layer for this piece.  I have this piece marked for 6 colors and I'm 1/3 of the way through.  I'm currently in the progress of marking all the areas that will need carved before printing the next layer.


I'm trying a new "high tech" registration method using a pieces of matboard.  The taco print is actually the first to test this configuration on.  So far though, I've also used it on the "a" and the Green Street print and so far so good.

 

Taco is a little different than what I'm used to printing where the tubing is generally clear or has a light color to it.  With "taco" the tubing is green...as are the letters.  The shadow and the hardware for the neon tubing support are the current grey colors.  Most of this block has already been carved for the next color, but I do have some smaller areas to clean up before moving onto the next color.


Green Street is also coming along very nicely so far with the new registration.  I usually don't ink small areas, I've done it on multiple pieces, but I generally like to see the print completely transform from layer to layer.  There is so much little detail in this piece though that I've decided to focus on one house at a time.

 


First up is the yellow house on the street.  I first printed a light yellow and then a second darker yellow (created with a mix of red and blue that I also mixed up).  I find it odd that the color I mixed almost matches up with a Yellow Ochre I made with a different yellow and Sepia.....I don't know how that works, apparently their are some similar colors in the Sepia mix.

This piece is actually working out pretty good and I've begun the carving of the yellow house.  The blue house is probably next, but I'm also considering the sky since it is actually the next lightest color.  There will be reflection of the sky in some of the windows so I'll have to figure out which way I want to go before I move on.


Finally for this update is the piece that I did not get to work on this past week.  I have one color left to print on this piece and then it's done.  Very excited about this, too bad I just didn't have the time for it.  A dark green, which is the shadow color for the foliage, is the only color that is left to print.  This piece is slightly mis-registered, but overall I like how it has turned out so far.

This little print will be one of my submissions for next years mini-print exhibition in New York.  I will also be starting a couple newer mini-prints so that I have a variety to work with. 

This is so far my first successful landscape.  I know that it's small sized help me to better understand how to create these and hoping to make some larger pieces that turn out just as well if not better.  I always keep in mind that with every piece I make I'm learning something new and in that learning I'll be able to better each attempt.

#art #printmaking #linocut #reductionlinocut #reliefprint #print #a #neon #sign #neonsign #landscape #Utah #Zion #NPS #GreenStreet #mystreet #houses #lightandshadow #yellow #Greensburg #PA #taco #djstacobar #lasvegas #nv