Ice Cream - 20x16" - 12 Color Reduction Linocut

 

Ice Cream - 20x16"

I've really slacked off on showing progress for this piece lately.  Since my last post I've printed 3 variations on a magenta/pink and a grey.  It's kinda crazy how the third time is a charm.  Usually failing twice at something really causes some form of hesitation on attempting the same subject matter for the third time.  Failure is generally a fantastic learning tool though.  It may not be what you want to have happen, but it teaches so much more than constant success.

I was originally down to two remaining colors, but decided to mix a color just to see how the next grey would react to some added blue.  When I finally finished mixing up a small batch of this cool grey color I decided that it would make a very nice cast shadow color.  I didn't really want to push the color count to 12, but sometimes you just have to do what you think will make your art better....sometimes less is better...sometimes more is.

I'm currently in the process of carving away the neon tubing and leaving the cast shadow area on the lettering, a shadow for the neon tubing and finally the sky to print.  Very excited to see this piece finally get completed....I've only been attempting this piece for over a year now.

#art #printmaking #linocut #reductionlinocut #reductionprint #neon #icecream #lightandshadow #disneyland #californiaadventure #catchaflav #california #anaheim

Two new colors for the Racer!

Racer - 16x34" - 7 Color Reduction Linocut

Hi everyone!!  Been a bit busy lately....life seems to be getting more and more in the way of this blog, but I'm still trying to push ahead.  The Racer rollercoaster sign is almost finished!!  One color to go.  The past two weekends I've been busy printing the sky and the very dark blue area of the hanging flag banners along the bottom.

Each photo was taken at a different time of day so I apologize about the difference in colors on the two.  The sky is closer to that in the top picture than that very bright blue in the bottom pic.  I'm pretty excited about how this piece has turned out.  Registration has been very good and other than a little issue getting the blue to print over the shadow red in a solid tone...things have gone well.

When I first printed the sky color the red underneath really wanted to show through.  So I reprinted the first ones sky a second time and it still turned out a little questionable, but passable.  When I printed my second piece the same thing happened so I doubled up printing the blue.  I still wasn't 100% happy with it....so I tried a third time.  This was not a great idea and the outcome was pretty hideous.  I blotted both the first and second attempts heavily with newsprint to remove as much ink as possible.  The remaining pieces to the edition were all printed with a single blue layer.

I decided that being patient and trying again once the single layer of blue dried might work better for me.  Thankfully I managed to talk myself into that patience because when I printed the blue again later that week things turned out really, really nice.

 

Here is the edition drying after the second weeks printing of the blue and below is the block as I was carving away the sky.  FYI....that carving tool is somewhere around 1/4 inch wide....that sky took forever to carve.  Only black remains though!!

That's all for now!  I have to get my lunch ready for work and get ready for bed.  The Ice Cream reduction linocut has also been moving along nicely and I will try to create a post about it tomorrow night!

#art #printmaking #linocut #reductionlinocut #reductionprint #Racer #rollercoaster #Kennywood #Pittsburgh #PA #412 #amusementpark